Showing all 25 results

U-Hub – Ethernet to U-NET Bridge for MLA Systems

Equipped with analogue and AES3 digital audio transport and facilitates PC connection and VU-NET™ software control of MLA Series arrays

DX0.4 – 2-in/4-out Networked Loudspeaker Processor

126.154 kr.
Ideal processing tool to partner the ADORN, CDD and BlacklineX ranges or indeed any system where comprehensive system control and protection is required

DX0.6 – 2-in/6-out Networked Loudspeaker Processor

171.992 kr.
Ideal processing tool to partner the ADORN, CDD and BlacklineX ranges or indeed any system where comprehensive system control and protection is required

DX4.0 – 4-in/8-out Networked Loudspeaker Processor

458.383 kr.
Advanced loudspeaker controller and system matrix with four input and eight output channels

Model 5330 Flex-Use Dante Audio Interface – 4 Analog Inputs & Outputs

247.877 kr.
The Model 5330 Flex-Use Dante Audio Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante audio-over-Ethernet media networking technology.

Model 5401A Dante Leader Clock

513.199 kr.
The Model 5401A Dante Leader Clock provides precise timing signals for applications that utilize the Dante audio-over-IP media networking technology.

Model 5402 Dante Leader Clock with GNSS Synchronization

696.812 kr.
The Model 5402 Dante Leader Clock with GNSS Synchronization provides precise timing signals for applications that utilize the Dante audio-over-IP (AoIP) media networking technology.

8 x 1000W Q-SYS Network Audio Amplifier with 70/100V direct drive mode

CX-Q 8K8 features eight channels, capable of delivering customized power output loading and a total maximum power of up to 8000 W. Low-Z, 70 V or 100 V direct drive are available on all channels

2 x 60W Q-SYS Network Audio Amplifier

The Q-SYS SPA-Qf 60x2 network amplifier continues the Q-SYS Platform evolution of pairing centralized Core OS processing with expanding endpoint utility

4 x 60W Q-SYS Network Audio Amplifier

The Q-SYS SPA-Qf 60x4 network amplifier continues the Q-SYS Platform evolution of pairing centralized Core OS processing with expanding endpoint utility

2 x 60W Class-D Audio Amplifier with 70/100V direct drive mode

120.139 kr.
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4? and 8?..

4 x 60W Class-D Audio Amplifier with 70/100V direct drive mode

174.919 kr.
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel int...

2 x 200W Class-D Audio Amplifier with 70/100V direct drive mode

140.220 kr.
The SPA2-200 two channel amplifier delivers up to 200 watts rms per channel into 4 or 8 ohms; the two channels can also be bridged providing up to 400 watts rms into 4 or 8 ohms..

Core 8 Flex Q-SYS Network and Analog I/O Processor

In addition to its 64 x 64 network I/O capacity, the Core 8 Flex offers eight on-board Flex channels and eight GPIO on-ramps to integrate analog au..

Core Nano Q-SYS Network I/O Processor

Use it to support an installation with network-only devices or add a few analog audio channels by pairing it with Attero Tech Series I/O devices..

4 x 100W Class-D Audio Amplifier with 70V/100V direct drive mode

The SPA4-100 four channel amplifier delivers 100 watts rms per channel into 4 or 8 ohms; the four channels can also be bridged in pairs, each pair providing up to 200 watts rms into 4 or 8 ohms..