Showing all 19 results

DX4.0 – 4-in/8-out Networked Loudspeaker Processor

458.383 kr.
Advanced loudspeaker controller and system matrix with four input and eight output channels

iKON iK42 – 4-channel 20,000W Class D Power Amplifier

1.535.584 kr.
The iK42 can deliver a full 5000 watts per channel into 2Ω with all channels driven while remaining highly efficient

iKON iK81 – 8-channel 10,000W Class D Power Amplifier

1.673.099 kr.
The iK81 can deliver a full 1250 watts per channel into 2, 4 or 8 ohms with all channels driven while remaining highly efficient

8 x 1000W Q-SYS Network Audio Amplifier with 70/100V direct drive mode

CX-Q 8K8 features eight channels, capable of delivering customized power output loading and a total maximum power of up to 8000 W. Low-Z, 70 V or 100 V direct drive are available on all channels

2 x 60W Q-SYS Network Audio Amplifier

The Q-SYS SPA-Qf 60x2 network amplifier continues the Q-SYS Platform evolution of pairing centralized Core OS processing with expanding endpoint utility

4 x 60W Q-SYS Network Audio Amplifier

The Q-SYS SPA-Qf 60x4 network amplifier continues the Q-SYS Platform evolution of pairing centralized Core OS processing with expanding endpoint utility

2 x 60W Class-D Audio Amplifier with 70/100V direct drive mode

120.139 kr.
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4? and 8?..

4 x 60W Class-D Audio Amplifier with 70/100V direct drive mode

174.919 kr.
The SPA Series amplifiers from are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel int...

2 x 200W Class-D Audio Amplifier with 70/100V direct drive mode

140.220 kr.
The SPA2-200 two channel amplifier delivers up to 200 watts rms per channel into 4 or 8 ohms; the two channels can also be bridged providing up to 400 watts rms into 4 or 8 ohms..

Core 8 Flex Q-SYS Network and Analog I/O Processor

In addition to its 64 x 64 network I/O capacity, the Core 8 Flex offers eight on-board Flex channels and eight GPIO on-ramps to integrate analog au..

Core Nano Q-SYS Network I/O Processor

Use it to support an installation with network-only devices or add a few analog audio channels by pairing it with Attero Tech Series I/O devices..

4 x 100W Class-D Audio Amplifier with 70V/100V direct drive mode

The SPA4-100 four channel amplifier delivers 100 watts rms per channel into 4 or 8 ohms; the four channels can also be bridged in pairs, each pair providing up to 200 watts rms into 4 or 8 ohms..

21-fold switched AC/DC PDU

AC/DC PDU, 1 x 16 A, 4 x IEC C13, 12x terminal clamp (12V/24V DC max. 4A), 5 x terminal clamp/ USB A (5V DC max. 3A, USB only power), 2 sensor conn..