Vörulýsing
HDMI-TPS-RX120-HDSR is a TPS (HDBaseTTM) receiver with a local HDMI input and a built-in HD video scaler. Conversion between common formats and frame rates are supported. The connected display sink receives continuous HDMI signal from the scaler even when a switching in the input signal occurs.
The unit scales any incoming resolution to fixed output resolutions of maximum 1920×1200@60Hz (RB) or FullHD 1920×1080@60Hz. It performs with low latency, providing visually seamless switching on output; HDMI, HDCP and DVI compliant, and allows connecting from 155 m in Long Reach Mode and 120 m in automatic mode. It also handles RS-232 for monitor control, Ethernet control, local hdmi input switching, optional IR remote controller for easy setup:HDMI-TPS-RX120-HDSR has a local HDMI input with a built-in switcher to select source, its configuration appears as OSD (On-Screen-Display) messages on the connected display, and can be adjusted using the front panel buttons.
The device is compatible with all HDBaseT compatible Lightware TPS transmitters and matrix switchers, its features include factory loaded EDID memory slots and Pixel Accurate Reclocking. This scaler can be controlled by the Lightware Device Controller software, which can perform any adjustment using a connected computer via RS-232.
The device can be used standalone or mounted on a rack, on truss, or a piece of furniture, it’s rack ears are compatible with the VESA mounting standard. As an optional extra accessory, a remote controller is also available to control basic functions.
Highlighted features
- Scaling of video signals to match the properties of the target display/sink
- Bi-directional RS-232 and IR extension (pass-through and control)
