Vörulýsing
- Allskyns rigging, flutnings og aðrir aukahlutir í boði
- Ætlað með MLX bassabotni
Every so often a new technology emerges that overtakes previous technologies — and in time replaces them. Just as line array took over from point-source clusters over 20 years ago, Martin Audio’s revolutionary award-winning Multi-cellular Loudspeaker Array [MLA] technology is reinventing the way loudspeaker arrays are configured and controlled.
With it has come an unsurpassed control of sound with pristine fidelity and huge output capability — bringing the FOH engineer and the audience together in a more powerful, involving experience.
Some describe it as magic, but in its simplest terms each MLA Array has up to 144 individual acoustic elements [cells], each with its own onboard amplifier and DSP, which can be optimised by software to deliver the sound across the audience to meet the sonic goals required for any space.
It remains the only system on the market to allow multiple sonic goals to be prioritised and optimised accordingly. For example, not only can MLA generate an even sound field over the audience, it can contain it as well — significantly reducing the influence of the room.
Hard Avoid® areas ─ such as behind and below the array, ceilings, balcony edges and beyond the venue perimeter ─ can also be programmed in. Vertical coverage can even be fine-tuned electronically in-situ to cope with changing environmental conditions and last-minute changes in rigging height, without having to re-rig.
With incredibly easy-to-use and highly accurate predictive software [DISPLAY] doing all the grunt work with the system, the FOH engineer retains full artistic control and can enjoy mixing the show in the full knowledge that the sound created at the mix position will be heard everywhere throughout the audience.
Such is the confidence that MLA can bring, that significantly less time is spent setting up the system and even less time is spent walking the room.
Specification
| Acoustical | |
| TYPE | Three-way cellular drive, active array element |
| FREQUENCY RESPONSE | 52Hz-18kHz ± 3dB |
| MAXIMUM SPL @ 1m |
|
| Drivers | |
| LF | 2 x12” (300mm)/3” (75mm) voice coil, ultra-long excursion, neodymium magnet drivers, Hybrid® bass horn loaded |
| MF | 2 x 6.5” (165mm)/2” (50mm) coil, neodymium magnet drivers, horn loaded |
| HF | 3 x 1” (25mm) exit neodymium magnet compression drivers, horn loaded |
| Rated Power | |
| LF | 800W AES, 3200W peak |
| MF | 400W AES, 1600W peak |
| HF | 150W AES, 600W peak |
| Dispersion | |
|
|
| Crossover Frequencies | |
|
|
| Audio Inputs | |
| CONNECTORS |
|
| ANALOGUE INPUT IMPEDANCE | 20kΩ balanced to ground |
| MAXIMUM ANALOGUE INPUT LEVEL | 6.15Vrms (+18dBu), over voltage protected |
| NOMINAL SYSTEM GAIN | 28.5dB |
| AES/EBU IMPEDANCE | 110Ω balanced, Receive and transmit termination |
| Network | |
| CONNECTORS | 2x IP68 rated 8-way, quick-release type |
| PROTOCOL | U-NET |
| Amplifier Module | |
| TYPE | Six channel Class D, fixed frequency |
| PEAK OUTPUT POWER | 6000W |
| AVERAGE EFFICIENCY | 75% |
| COOLING |
|
| MAXIMUM AMBIENT TEMPERATURE | 45°C (113°F) for full output |
| Power Supply | |
| TYPE | Switch mode, fixed frequency with PFC |
| AC INPUT OPERATING RANGE | 100 – 240V ~ AC, 50 – 60Hz |
| POWER FACTOR | > 0.95 |
| NOMINAL POWER CONSUMPTION | 900W |
| MAINS CONNECTOR | 16A IEC309 (Ceeform) – IP44 rated |
| General | |
| ENCLOSURE | Vertical trapezoid with 3.75° wall angle, multi-laminate birch and poplar-ply construction |
| FINISH | Textured black PU coating |
| PROTECTIVE GRILLE | Black HEX perforated steel |
| FITTINGS |
|
| IP RATING | IP 24 |
| DIMENSIONS | (inc. wheel-board) (W) 1136mm x (H) 372mm (376mm) x (D) 675mm (825mm) (W) 44.7in x (H) 14.6in (14.8in) x (D) 26.5in (32.4in) |
| WEIGHT | (ex. wheel-board) 87.5kg (193lbs) |
