Vörulýsing
The ACP-55T brings full-frequency response, consistent coverage and intelligibility to a wide range of architectural environments — from hotel atriums and exhibition spaces to retail outlets, bars and restaurants.
Comprising a 5.25” (135mm) LF driver and a 0.75” (19mm) silk-dome tweeter, the ACP-55T produces 109dB peak output at 1 metre and delivers superb sound quality for both music and speech reproduction. Its stylish pendant enclosure is equipped with a single-point mounting system plus provision for attaching a safety cable.
The consistent and wide 150° conical coverage of the ACP-55T reduces the number of speakers required for even coverage — leading to a reduction in installation cost.
It incorporates a high-quality transformer for 70V/100V line operation, with transformer taps selected by a rotary switch at the top of the pendant enclosure. The switch also provides for 16-ohm low impedance operation — enabling four or more speakers to be driven in parallel from a single amplifier channel. For full-bandwidth protection, the low and high- frequency sections are individually protected against overload by auto-resetting thermal fuses.
The grille is bezel-less for a clean look, its bayonet fitting is easy to remove without the use of tools and finished in white or black to match ADORN on-wall loudspeakers and may also be painted to blend with any décor.
Specification
TYPE | Passive two-way pendant speaker, ported bass reflex |
FREQUENCY RESPONSE | 98Hz-20kHz ± 3dB, -10dB @ 56Hz |
DRIVERS |
|
RATED POWER | 50W AES, 200W peak |
RECOMMENDED AMPLIFIER | VIA2004 (for low-impedance operation) |
SENSITIVITY | 86dB / 1W(4V) / 1m (full space) |
MAXIMUM SPL | 109dB peak |
NOMINAL IMPEDANCE | 16Ω |
DISPERSION (-6dB) | 150° conical up to 7kHz |
CROSSOVER | 3kHz passive (LF and HF auto-resetting fuses |
TRANSFORMER TAPS |
|
RECOMMENDED HIGH-PASS FILTER | 60Hz 24dB/oct |
ENCLOSURE | UL 94V-0 rated ABS baffle and enclosure |
FINISH | Black or white |
GRILLE | Perforated steel, powder-coated, bayonet fitting |
CONNECTORS | Ceramic connector (in and link) |
DIMENSIONS |
|
WEIGHT | 3.46kg (7.62lbs) |