Adorn 5,25″ Passive Two-way Ceiling Speaker with Transformer

38.982 kr.

UL 94V-0 rated and designed for background and foreground applications

Framleiðandi

Litur

Vörulína

Eiginleikar

,

Stærð

Til á lager

Vörunr. MAR-ACS-55T-W Vöruflokkar: ,
Vörulýsing

Vörulýsing

The ACS-55T brings full-frequency response, consistent coverage and intelligibility to a wide range of architectural environments — from hotels and concourses to retail outlets, bars and restaurants.

Comprising a 5.25” (135mm) LF driver and a 0.75” (19mm) silk-dome tweeter, the ACS-55T produces 113dB peak output at 1 metre and has a high-fidelity sonic character ideal for both music and speech reproduction. Its ported bass reflex design and backcan with generous internal volume maximises low frequency output and delivers strong bass that extends down to 62Hz.

The wide 150° conical coverage of the ACS-55T reduces the number of speakers required for even coverage — leading to a reduction in installation cost.

It incorporates a high-quality transformer for 70V/100V line operation, with transformer taps selected by a rotary switch accessible behind the powder-coated, perforated steel grille. The switch also provides for 16-ohm low impedance operation — enabling four or more speakers to be driven in parallel from a single amplifier channel. For full-bandwidth protection, the low and high-frequency sections are individually protected against overload by auto-resetting thermal fuses.

The grille is bezel-less for a clean look, its bayonet fitting is easy to remove without the use of tools and finished in white (RAL9016) to match ADORN on-wall loudspeakers and may also be painted to blend with any décor.

Specification

TYPE Compact, passive two-way ceiling speaker, ported bass reflex
FREQUENCY RESPONSE 98Hz-20kHz ± 3dB, -10dB @ 62Hz
DRIVERS
  • LF: 5.25” /1” high-temp voice coil, coated paper cone, rubber surround, ferrite motor, pressed steel chassis.
  • HF: 0.75” silk dome, neodymium motor.
RATED POWER 50W AES, 200W peak
RECOMMENDED AMPLIFIER VIA2004 (for low-impedance operation)
SENSITIVITY 90dB / 1W(4V) / 1m
MAXIMUM SPL 113dB peak
NOMINAL IMPEDANCE 16Ω
DISPERSION (-6dB) 150° conical up to 7kHz
CROSSOVER 3kHz passive (LF and HF auto-resetting fuses)
TRANSFORMER TAPS 70V: 30w / 15w / 7.5w / 3.75w
100V: 30w / 15w / 7.5w
RECOMMENDED HIGH-PASS FILTER 65Hz 24dB/oct
ENCLOSURE UL 94V-0 rated ABS baffle with steel backcan
FINISH Baffle and grille: RAL9016 white Backcan: zinc plated
GRILLE Perforated steel, powder-coated, bayonet fitting
CONNECTORS Ceramic connector (in and link) located behind fire-retardant steel cover
ACCESSORIES (included)
  • 2 tile rails
  • C-ring backing plate
  • Cut-out template
DIMENSIONS
  • (OD) 245mm x (D) Back Can 192mm, (D) Inc. Grille 209mm
  • (OD) 9.7in x (D) Back Can 7.55in, (D) Inc. Grille 8.23in
HOLE CUT-OUT DIMENSION 222mm (8.74”) diameter
WEIGHT 3kg (6.6lbs)

Nánari upplýsingar á heimasíðu framleiðanda

Fyrirspurn um vöru

Fyrirspurn um vöru