Adorn 5,25″ Passive Shallow Two-way Ceiling Speaker with Transformer

34.477 kr.

UL 94V-0 rated and designed for background and foreground applications

Framleiðandi

Litur

Vörulína

Eiginleikar

,

Stærð

Til á lager

Vörunr. MAR-ACS-55TS-W Vöruflokkar: ,
Vörulýsing

Vörulýsing

The ACS-55TS brings full-frequency response, consistent coverage and intelligibility to a wide range of architectural environments — from hotels and concourses to retail outlets, bars and restaurants.

Comprising a 5.25” (135mm) LF driver and a 0.75” (19mm) silk-dome tweeter, the ACS-55TS produces 113dB peak output at 1 metre and has a high-fidelity sonic character ideal for both music and speech reproduction. Its ported design delivers strong bass that extends down to 79Hz.

The wide 150° conical coverage of the ACS-55TS makes it particularly suitable for low ceilings and reduces the number of speakers required for even coverage — leading to a reduction in installation cost. It features a shallow backcan for installation in ceilings with a minimum cavity depth.

It incorporates a high-quality transformer for 70V/100V line operation, with transformer taps selected by a rotary switch accessible behind the powder-coated, perforated steel grille. The switch also provides for 16-ohm low impedance operation — enabling four or more speakers to be driven in parallel from a single amplifier channel. For full-bandwidth protection, the low and high-frequency sections are individually protected against overload by auto-resetting thermal fuses.

The grille is bezel-less for a clean look, its bayonet fitting is easy to remove without the use of tools and finished in white (RAL9016) to match ADORN on-wall loudspeakers and may also be painted to blend with any décor.

Specification

TYPE Compact, passive two-way ceiling speaker, ported bass reflex
FREQUENCY RESPONSE 117Hz-20kHz ± 3dB -10dB @ 79Hz
DRIVERS
  • LF: 5.25” /1” high-temp voice coil, coated paper cone, rubber surround, ferrite motor, pressed steel chassis
  • HF: 0.75” silk dome, neodymium motor
RATED POWER 50W AES, 200W peak
RECOMMENDED AMPLIFIER VIA2004 (for low-impedance operation)
SENSITIVITY 90dB / 1W(4V) / 1m
MAXIMUM SPL 113dB peak
NOMINAL IMPEDANCE 16Ω
DISPERSION (-6dB) 150° conical up to 7kHz
CROSSOVER 3kHz passive (LF and HF auto-resetting fuses)
TRANSFORMER TAPS 70V: 30w / 15w / 7.5w / 3.75w
100V: 30w / 15w / 7.5w
RECOMMENDED HIGH-PASS FILTER 65Hz 24dB/oct
ENCLOSURE UL 94V-0 rated ABS baffle with steel backcan
FINISH Baffle and grille: RAL9016 white Backcan: zinc plated
GRILLE Perforated steel, powder-coated, bayonet fitting
CONNECTORS Ceramic connector (in and link) located behind fire-retardant steel cover
ACCESSORIES (included)
  • 2 tile rails
  • C-ring backing plate
  • Cut-out template
DIMENSIONS
  • (OD) 245mm x (D) Back Can 100mm, (D) Inc. Grille 118mm
  • (OD) 9.7in x (D) Back Can 3.95in, (D) Inc. Grille 4.65in
HOLE CUT-OUT DIMENSION 222mm (8.74”) diameter
WEIGHT 2.8kg (6.2lbs)

Nánari upplýsingar á heimasíðu framleiðanda

Fyrirspurn um vöru

Fyrirspurn um vöru