Vörulýsing
AUDIO & VIDEO
Inputs
TRANSMITTER
1x HDMI: 19-pin type A
1 x Audio: 3.5mm (1/8in)
TRS Stereo
RECEIVER
1 x HDBT: 8-pin RJ45 Female
1 x Audio: 3.5mm (1/8in) TRS Stereo
Outputs
TRANSMITTER
1x HDBT: 8-pin RJ-45 Female
1x Audio: 3.5mm (1/8in) TRS Stereo
RECEIVER
1x HDMI: 19-pin type A
1x Audio: 3.5mm (1/8in) TRS Stereo
Output Video Encoding
HDBaseT Class C
Encoding Data Rate
10.2Gbps
End to End Latency
10μs (microseconds)
Audio Formats
2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
Video Resolutions (max)
1920x1080p @60Hz 12bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @30Hz 12bit 4:2:2 HDR
3840x2160p @30Hz 8bit 4:4:4 HDR
Supported Standards
DCI | RGB | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
340MHz
COMMUNICATION & CONTROL
HDMI
HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | Line Audio | 1-way PoH (TX powers RX) | Bidirectional RS-232 | CEEC
RS-232
1x RS-232: 3-pin Phoenix (Transmitter and Receiver)
USB
1x Type B (host | 4x Type A (device)
Maximum uplink speed: 190Mbps
POWER
Power Supply
12V DC 2A
Max Power Consumption
12W
Additional Features
- Supports the latest UHD resolutions including HDR10, HDR 10+, HLG and Dolby Vision formats
- Extend 4K@60Hz (4:2:0) content up to 100/328ft meters using Cat6a cabling or higher
- USB data transfers of up to 190Mbps for webcams and peripherals
- High-speed USB 2.0 pass-through up to 100 meters/328ft
- Supports full CEC passthrough via TV remote to control connected AV equipment such as AVR volume or menu navigation
- PoH allows the transmitter to power the receiver over category cable
- Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
- LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
- Locking DC power jacks
- 12v DC PSU with US, UK, EU & AU Power cables included
- Mounting brackets included
