Wavefront Precision 2×8″ – Passive Three-way Line Array

Small line array featuring scalable resolution optimisation.

Framleiðandi

Litur

,

Vörulína

Eiginleikar

Stærð

Tengi

Vörunr. MAR-WPS Vöruflokkar: , Tag:
Vörulýsing

Vörulýsing

  • Einnig fáanlegt hvítt
  • Einnig fáanlegt Marine Grade
  • Allskyns rigging og flutnings aukahlutir í boði
  • Mælt er með SXC118 bassabotnum með þessu kerfi

The WPS is a versatile, state-of-the-art line array with a peak SPL of 133dB and is designed for small-to-medium scale touring and install applications that require a high output array with reduced weight and footprint. With exemplary coverage consistency and superb sound performance, the flexibility of WPS makes it an ideal system for live sound reinforcement and installations in theatres, concert halls and Houses of Worship. Return-on-investment within a rental company’s inventory is maximised by also deploying WPS arrays as front-fill, delay or side-hang support for larger WP systems.

WPS is a passive 3-way system which integrates a high density of drive units in a very compact enclosure. It features 2 x 8” (200mm) LF drivers, 4 x 4” (100mm) midrange drivers and 4 x 1” (25mm) exit HF compression drivers loaded by a moulded HF horn which occupies the full width of the enclosure — defining the 100° horizontal constant directivity coverage pattern of both the HF and midrange sections.

The 4” midrange drivers are compression-loaded to raise efficiency and enter the horn walls via annular slots close to the HF throat to sum effectively with the HF wavefront. In the HF section, four 1” exit compression drivers deliver pristine high frequency sound without the harshness and distortion associated with larger format devices.

The 8” LF drivers are set back behind the walls of the HF horn, with a small volume of air in front of each driver increasing the output at the upper end of its operating range. The LF exit apertures are spaced apart horizontally to provide useful LF horizontal pattern control.

For extended low frequency performance, WPS is designed to be partnered with the SXC118 cardioid subwoofer or its flyable variant, the SXCF118.

WPS is also available in a marine variant, built to order. This product is suitable for permanent outdoor installation.

Specification

TYPE Three-way, passive line array element
FREQUENCY RESPONSE 70Hz-18000Hz ± 3dB
DRIVERS
  • LF: 2 x 8” (200mm)/2” (50mm) voice coil, long excursion, vented yoke, neodymium magnet drivers
  • MF: 4 x 4” (100mm)/1” (25mm) coil, neodymium magnet drivers, compression loaded
  • HF: 4 x 1” (25mm) exit/1.4” (35mm) HT Polymer diaphragm, neodymium magnet compression drivers
SYSTEM AMPLIFIER iKON iK42
SYSTEM RESOLUTION 1 to 3 enclosures per amplifier channel (iK42)
MAXIMUM SPL 133dB peak
NOMINAL IMPEDANCE
DISPERSION (-6dB)
  • 100º horizontal (-6dB), 120º horizontal (-10dB)
  • 10° vertical
CROSSOVER 520Hz, 1.6kHz internal passive
ENCLOSURE Vertical trapezoid with 5º wall angle, multi-laminate birch and poplar-ply construction
FINISH Black textured paint
PROTECTIVE GRILLE Black HEX perforated steel
CONNECTORS 2 x NL4 type
INPUT CONNECTIONS 1+/1-
FITTINGS
  • 3-point rigging system
  • 2 x side pocket handles
  • 2 x rear grip handles
FLOWN ARRAY MAXIMUM 16 (installation) and 24 (touring) enclosures in a single array
DIMENSIONS
  • (W) 650mm x (H) 261mm x (D) 400mm
  • (W) 25.6in x (H) 10.3in x (D) 15.8in
WEIGHT 27kg (60lbs)

Nánari upplýsingar á heimasíðu framleiðanda

Fyrirspurn um vöru

Fyrirspurn um vöru